Product instructions
YH type - metallurgy wire rope electric hoist - YH type 1 t ~ 10 t metallurgical steel wire rope electric hoist, is in accordance with relevant state regulations, in which CD1 and MD1 type electric wire rope hoist on the basis of design is specially appropriate as applied to metallurgical industry electric hoist, working level to M6.YH type hoist will add a safety brake set directly on the drum, reached the maximum safety lifting products.The two series of products can be lifting molten metal, but under - 10 ℃ low temperature or above 50 ℃ high temperature environment with explosion danger, place, full of sulfuric acid and other corrosive gases in lifting a ban the use of toxic, flammable, in order to ensure safe and reliable.This product is recommended to use remote control operation.
YH type metallurgical steel wire rope electric hoist electric hoist working-level M5, M6;Working environment temperature is not higher than 60 ℃., under 1000 m in altitude, it is to use the field should be flammable and corrosive gas.The applicable power for three-phase ac 50 hz, 380 v.Electric hoist lifting mechanism work level for M6, with support (work) brake and brake safety.Normal work by the support on the conical rotor motor brake braking on transmission mechanism.If from any link between motor and roller drive system fails, the hook and load speed dropped, then by the safety brake will stop drum brake on the drum to prevent load speeding down cause an accident.Electric hoist is not only set up double brake and set up a double up the ceiling and down limit device, at the same time set the over-current protection, protection, phase sequence protection, the pressure loss weight overload limiter, down speeding power-off protection and other security protection.To enhance the safety performance of electric hoist.The insulation of the motor rating is class H, use the steel core 6 x 371 wr wire rope meet the needs of the metallurgical production conditions.When set up under the high temperature heat insulation protection of gear reducer and motor function, install the machine at the bottom of the electric hoist drum shell insulation board, high thermal radiation to isolate the molten metal.The metallurgical electric wire rope hoist control type using remote control or not follow type away from heat source control mode to ensure the personal safety of operators. Manufacture License of Special Equipment People's Republic of China
 
ShandongLonghui lifting machinery co., LTD http://www.lhqzj.com
Pre-sale consultation: the 400-671-0708 after-sales service: 0538-7442749
fax: 0538-7442599, E-mail: longhui@188.com Baidu statistics
| 